The depth increment of the final machining pass. If Enabled is true, the toolpaths associated with this machining operation are displayed and included in the gcode output. If this width is greater than the tool diameter, multiple parallel cuts are used. Controls whether to cut to depth first or all cuts on this level first. A multi-line gcode script that will be inserted into the gcode post before the current machining operation. CustomMOPFooter CustomMOPHeader CutFeedrate CutOrdering CutWidth DepthIncrement Enabled FinalDepthIncrement HoldingTabs A multi-line gcode script that will be inserted into the gcode post after the current machining operation.
This will result in some stock overcutting but is useful in cases where machined parts will be fitted together such as slot joints or inlays. CornerOvercut Set CornerOvercut to True to add an extra machining move, which will cut into inside corners that would not ordinarily be cut. CollisionDetection Makes sure adjacent toolpaths do not overlap.
CAMBAM ROTATE PART FREE
The clearance plane should be clear of the stock and any holding devices to allow free movement to any location. Properties ClearancePlane The clearance plane (offset from the work plane). Lead in moves and holding tabs are supported. Cuts can be inside or outside a selected shape. Other uses include facing edges and with increased cut widths can be used to create pockets. Profile Machining OperationA 2.5D Profile machining operation is typically used to cut out shapes.